WC1: Additional Strategic REE Tenements acq next to Salazar
Released
Released
Announcement PDF
ADDITIONAL STRATEGIC REE TENEMENTS ACQUIRED
CONTIGUOUS TO SALAZAR
LEADING THE CHARGE IN
CRITICAL MINERALS
Highlights
•
Four exploration licences totalling 451km2 acquired from Dundas
Minerals Limited (ASX: DUN)
•
Licences contiguous to West Cobar’s Salazar REE Project (current JORC
2012 Mineral Resource Estimate of 190 Mt at 1172 ppm TREO)
•
New ground features same host terrane as Salazar’s Newmont deposit
and is similarly prospective for heavy magnet rare earth mineralisation
•
Aircore drill program planned to test extensions of Newmont REE deposit
and other targets on newly acquired ground
25 SEPTEMBER 2023
ASX: WC1
MAJOR PROJECTS
Salazar, WA - Rare Earth Elements
Nevada, USA - Lithium
Hermit Hill, NT – Lithium
Bulla Park, NSW - Copper
DIRECTORS & MANAGEMENT
Rob Klug Non Exec Chairman
Matt Szwedzicki Managing Director
David Pascoe Head of Technical &
Exploration
Kevin Das Non Exec Director
Mark Bolton Non Exec Director
Ron Roberts Non Exec Director
CAPITAL STRUCTURE
Ordinary Shares
Options (unlisted)
Market Cap (undiluted)
Share Price (22/09/23)
97.13m
20.7m
$8.4m
$0.086
West Cobar Metals Limited (ASX: WC1) (“West Cobar”, “the Company”) is
pleased to announce the acquisition of four exploration licences, totalling
451km2, contiguous with the Company’s 100%-owned Salazar Project, 120km
north-east of Esperance in southern Western Australia.
The Salazar REE Project currently comprises granted tenements E63/1469,
E63/1496 and E69/3982, totaling approximately 720km2. It hosts an inferred
and indicated resource of 190 Mt at 1,172 ppm total rare earths oxide (TREO)*
and is one of the most advanced clay-hosted rare earths projects in Australia.
As part of the transaction with Dundas Minerals Limited (“Dundas”), West
Cobar will acquire an additional four exploration licences – E63/2056,
E63/2083, E63/2078 and E63/2063 – increasing its Salazar REE Project
landholding to a total of 1,171km2.
West Cobars’ Managing Director, Matt Szwedzicki, commented: “This
package of tenements provides excellent potential to supplement, both in
terms of tonnes and optimised material selection, what is already a
substantial clay-hosted resource at the Salazar Project.
WEST COBAR METALS LIMITED
Address: Level 8, 216 St Georges Terrace,
Perth WA 6000
Phone: +61 8 9481 0389
Website: www.westcobarmetals.com.au
Email: info@westcobarmetals.com.au
Dundas has acquired an extensive geophysical dataset over the tenements
which gives us a significant head start in targeting the most attractive areas.
With a significant amount of exploration, metallurgical and technical studies
already completed on Salazar, the acquisition of this additional ground is
another step towards establishing the project as the premier clay-hosted rare
earths opportunity in Western Australia.”
* West Cobar Metals, ASX announcement, ‘Salazar Clay-REE Resource quadruples. 9
August 2023
Figure 1: Location of the Salazar REE project and tenements, and ground to be acquired from Dundas Minerals Ltd
Commercial terms
West Cobar will acquire the four tenements for a consideration of $20k cash plus five million fully
paid ordinary shares (escrowed for 2 years), subject to shareholder approval at the Company’s
upcoming Annual General Meeting. The transaction is also subject to standard conditions for a
transaction of this nature including any necessary regulatory approvals.
Dundas will retain the nickel, copper and gold rights for the three northern tenements (E63/2078,
E63/2083 and E63/2063) for a period of 24 months. These rights will pass to West Cobar if Dundas
has not conducted, or had success with, exploration activities targeting those minerals within that
period.
Prospectivity of new tenements
The ground to be acquired from Dundas has not been subject to previous exploration specifically
for REEs. However, the tenement package comes with an extensive geophysical data set which
Dundas has acquired. In total, Dundas has spent more than $4M on exploration work on the
tenements (including drilling on E63/2078 and E63/2056).
Salazar’s Newmont REE deposit may extend into the newly acquired E63/2056 tenement,
following the tightly folded shear zone structure seen on the aeromagnetics to the south-west
(Figure 3).
Dundas drilled six RC and diamond holes in 2022 within the tenements and assayed for REEs with
best results of 5m of 980ppm TREO from 22m (23MSRC002) from the Matilda South Prospect1,
which lies along the shear trend described above.
In 2012, Anglogold Ashanti drilled 221 aircore holes in the southern portion of E63/2063 targeting
gold and obtained up to 825ppm TREO in bedrock samples (Figure 2).2
Figure 2: Tenements to be acquired from Dundas Minerals
Figure 3: Detail of E63/2056. Processed TMI RTP
aeromagnetic image, shows potential of Newmont REE
mineralisation to extend to south-west along tightly folded
shear structure
Next steps
An aircore drill program is planned to test extensions of Newmont the REE deposit and other
targets based on interpretation of gravity, aeromagnetics and airborne EM, together with the
sparse available historical drill hole information.
A PoW for 145 aircore holes, applied for by Dundas, has been approved within E63/2056.
1
Dundas Minerals Limited, ASX Announcement, ‘Exploration Update: Matilda South and Northwest’, 28 April 2023.
Anglogold Ashanti, Viking Project, Combined Annual Report to the Dept of Mines and Petroleum for the period
ending 30 September 2012 (public domain).
2
-ENDSThis ASX announcement has been approved by the Board of West Cobar Metals Limited.
For further information:
Matt Szwedzicki
Managing Director
matt.szwedzicki@westcobarmetals.com.au
+61 8 9481 0389
Luke Forrestal
GRA Partners
luke.forrestal@grapartners.com.au
+61 411 479 144
This announcement has been prepared for publication in Australia and may not be released or distributed in
the United States. This announcement does not constitute an offer to sell, or a solicitation of an offer to buy,
securities in the United States or any other jurisdiction. Any securities described in this announcement have
not been, and will not be, registered under the US Securities Act of 1933 and may not be offered or sold in
the United States except in transactions exempt from, or not subject to, the registration of the US Securities
Act and applicable US state securities laws.
Forward looking statement
Certain information in this document refers to the intentions of West Cobar, but these are not intended to be
forecasts, forward looking statements or statements about the future matters for the purposes of the
Corporations Act or any other applicable law. The occurrence of the events in the future are subject to risk,
uncertainties and other actions that may cause West Cobar's actual results, performance or achievements to
differ from those referred to in this document. Accordingly, West Cobar and its affiliates and their directors,
officers, employees and agents do not give any assurance or guarantee that the occurrence of these events
referred to in the document will actually occur as contemplated.
Statements contained in this document, including but not limited to those regarding the possible or assumed
future costs, performance, dividends, returns, revenue, exchange rates, potential growth of West Cobar,
industry growth or other projections and any estimated company earnings are or may be forward looking
statements. Forward-looking statements can generally be identified by the use of words such as ‘project’,
‘foresee’, ‘plan’, ‘expect’, ‘aim’, ‘intend’, ‘anticipate’, ‘believe’, ‘estimate’, ‘may’, ‘should’, ‘will’ or similar
expressions. These statements relate to future events and expectations and as such involve known and
unknown risks and significant uncertainties, many of which are outside the control of West Cobar. Actual
results, performance, actions and developments of West Cobar may differ materially from those expressed
or implied by the forward-looking statements in this document.
Such forward-looking statements speak only as of the date of this document. There can be no assurance that
actual outcomes will not differ materially from these statements. To the maximum extent permitted by law,
West Cobar and any of its affiliates and their directors, officers, employees, agents, associates and advisers:
• disclaim any obligations or undertaking to release any updates or revisions to the information to reflect
any change in expectations or assumptions;
• do not make any representation or warranty, express or implied, as to the accuracy, reliability or
completeness of the information in this document, or likelihood of fulfilment of any forward-looking
statement or any event or results expressed or implied in any forward-looking statement; and
• disclaim all responsibility and liability for these forward-looking statements (including, without
limitation, liability for negligence).
Competent Person Statement and JORC Information
The Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (the
‘JORC Code’) sets out minimum standards, recommendations and guidelines for Public Reporting in
Australasia of Exploration Results, Mineral Resources and Ore Reserves.
The Information contained in this announcement is an accurate representation of the available data and
studies for the Cobar West Projects and Salazar Project.
The information contained in this announcement that relates to the exploration information and geological
logging at the Salazar REE Project WA is based, and fairly reflects, information compiled by Mr David
Pascoe, who is Head of Technical and Exploration for West Cobar Metals Limited and a Member of the
Australian Institute of Geoscientists. Mr Pascoe has sufficient experience which is relevant to the style of
mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify
as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves’. Mr Pascoe consents to the inclusion in this announcement of
the matters based on his information in the form and context in which it appears.
The Company confirms that with respect to the Salazar Project, that it is not aware of any new information
or data that materially affects the information included in the Ore Resources provided by the Competent
Person in the announcement to the ASX of 9 August 2023 and that all material assumptions and technical
parameters underpinning the Ore Resources, continue to apply and have not materially changed.
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
techniques
Drilling
techniques
● Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the
broad meaning of sampling.
● Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
● Aspects of the determination of
mineralisation that are Material to the
Public Report.
● In cases where ‘industry standard’
work has been done this would be
relatively simple (eg ‘reverse
circulation drilling was used to obtain
1 m samples from which 3 kg was
pulverised to produce a 30 g charge
for fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types
(eg submarine nodules) may warrant
disclosure of detailed information.
Commentary
●
●
●
●
●
Industry standard drill methods, sampling
and analytical methods of RC and diamond
drill intersections of Dundas Minerals
described in JORC Table 1 of ‘Dundas
Minerals Ltd, ASX Announcement, 28 April
2023.
For Dundas Minerals’ RC drilling, drill
cuttings representative of each 1m down
hole interval were collected direct from the
sample return system after passing through
a cyclone and cone splitter. Samples were
normally composited over 4m
Sample sub-weights were in the range 23kg.
Dundas employed QAQC with blanks,
duplicates and standards inserted at regular
intervals in the sample sequence.
Industry standard drill methods, sampling
and analytical methods of AC drill program
(bottom of hole geochemical sampling) of
Anglogold Ashanti described in ‘Anglogold
Ashanti, Viking Project, Combined Annual
Report to the Dept of Mines and Petroleum
for the period ending 30 September 2012’
(public domain).
● Drill type (eg core, reverse circulation, ● Dundas Minerals employed a Hydco
1000H.track mounted multi-purpose rig. An
open-hole hammer, rotary air blast,
auxiliary booster and second compressor
auger, Bangka, sonic, etc) and details
enabled dry samples to be collected.
(eg core diameter, triple or standard
tube, depth of diamond tails, facesampling bit or other type, whether
core is oriented and if so, by what
method, etc).
Criteria
JORC Code explanation
Drill sample ● Method of recording and assessing
recovery
core and chip sample recoveries and
results assessed.
● Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
● Whether a relationship exists between
sample recovery and grade and
whether sample bias may have
occurred due to preferential loss/gain
of fine/coarse material.
Logging
Subsampling
techniques
and sample
preparation
Commentary
●
●
●
With Dundas Minerals’ drilling, sample
recoveries were visually estimated for each
meter by the supervising geologist.
The sample cyclone was routinely cleaned
between holes and when deemed necessary
to avoid contamination.
No relationship was determined between
sample recovery and grade.
● Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
● Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
● The total length and percentage of the
relevant intersections logged.
● Dundas Minerals completed geological
● If core, whether cut or sawn and
whether quarter, half or all core taken.
● If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
● For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
● Quality control procedures adopted
for all sub-sampling stages to
maximise representivity of samples.
● Measures taken to ensure that the
sampling is representative of the in
situ material collected, including for
instance results for field
duplicate/second-half sampling.
● Whether sample sizes are appropriate
● Drill returns were recovered through a
cyclone for every meter, then passed
through a 3-tier splitter. An eighth part was
put in a numbered calico bag.
● Composite samples over 4m were normally
taken. Most samples were dry.
● QAQC reference samples, duplicates and
blanks were routinely submitted with each
batch.
● The sample weights of 2-3kg and the
sampling method was considered
appropriate for the mineralisation style,
application and analytical techniques used.
logging of all holes in their entirety by visual
logging of lithology, weathering grain size,
mineralogy, texture and colour.
● Logging of drill chips was semi-quantitative.
● Chips from all 1m intervals were retained in
chip trays
Criteria
JORC Code explanation
Commentary
to the grain size of the material being
sampled.
Quality of
assay data
and
laboratory
tests
● The Intertek Genalysis laboratory that
● The nature, quality and
assayed the samples has NATA ISO/IEC
appropriateness of the assaying and
17025 accreditation.
laboratory procedures used and
● CRM’s, in-house controls, blanks and
whether the technique is considered
duplicates are analysed with each batch of
partial or total.
samples.
● For geophysical tools, spectrometers,
●
Gold assayed by fire assay (50g)
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make
and model, reading times, calibrations
factors applied and their derivation,
etc.
● Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (ie lack of bias) and
precision have been established.
Verification ● The verification of significant
of sampling
intersections by either independent or
and assaying
alternative company personnel.
● The use of twinned holes.
● Documentation of primary data, data
entry procedures, data verification,
data storage (physical and electronic)
protocols.
● Discuss any adjustment to assay data.
● Field data was collected on site using a
standard set of logging templates and
entered directly into Logchief software on a
laptop computer.
● Data was validated and uploaded into
Dundas Minerals database.
● Reported Multielement results (REE) are
converted to stoichiometric oxide (REO)
using element-to- stoichiometric ratio
factors:
Element
Lanthanum
Cerium
Praseodymium
Neodymium
Samarium
Europium
Gadolinium
Terbium
Dysprosium
Holmium
Erbium
Thulium
Ytterbium
Oxide
La2O3
CeO2
Pr6O11
Nd2O3
Sm2O3
Eu2O3
Gd2O3
Tb4O7
Dy2O3
Ho2O3
Er2O3
Tm2O3
Yb2O3
Ratio
1.173
1.228
1.208
1.166
1.160
1.158
1.153
1.176
1.148
1.146
1.143
1.142
1.139
Criteria
JORC Code explanation
Commentary
Lutetium
Yttrium
Location of
data points
Lu2O3
Y2O3
1.137
1.269
• Rare earth oxide is the industry accepted
form for reporting rare earths.
● Accuracy and quality of surveys used ● Drill hole locations were located using a
handheld GPS with an accuracy of +/- 3m.
to locate drill holes (collar and downhole surveys), trenches, mine workings ● Grid system used is MGA94 Zone 51
and other locations used in Mineral
Resource estimation.
● Specification of the grid system used.
● Quality and adequacy of topographic
control.
● Drill hole collar locations and orientations
Data spacing ● Data spacing for reporting of
are listed in Table 2 of Dundas Minerals’ ASX
and
Exploration Results.
announcement of 28 April 2023
distribution ● Whether the data spacing and
distribution is sufficient to establish
● Dundas’ drill holes were samples from
the degree of geological and grade
surface at 1m intervals.
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications
applied.
● Whether sample compositing has been
applied.
Orientation
of data in
relation to
geological
structure
● Dundas Minerals’ drilling was orientated
● Whether the orientation of sampling
oblique to strike as determined from
achieves unbiased sampling of
geophysical trends
possible structures and the extent to
which this is known, considering the
● There was insufficient structural knowledge
deposit type.
to ascertain whether a sampling bias exists.
● If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
Sample
security
● The measures taken to ensure sample
security.
●
Dundas Minerals delivered samples directly
to the freight company in Esperance by
Dundas staff, and then transported directly
to the laboratory deposit point.
Criteria
Audits or
reviews
JORC Code explanation
● The results of any audits or reviews of
sampling techniques and data.
Commentary
●
No audits or reviews of data have been
undertaken
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Type, reference name/number, location ●
and ownership including agreements
or material issues with third parties
such as joint ventures, partnerships,
overriding royalties, native title
interests, historical sites, wilderness or
national park and environmental
settings.
●
● The security of the tenure held at the
time of reporting along with any
known impediments to obtaining a
licence to operate in the area.
Mineral
●
tenement and
land tenure
status
Exploration ● Acknowledgment and appraisal of
done by
exploration by other parties.
other parties
E63/1496 containing the Newmont deposit
and prospects is 100% owned by Salazar
Gold Pty Ltd, a wholly owned subsidiary of
West Cobar Metals Ltd. It is located 120km
NE of Esperance on Vacant Crown Land. The
Ngadju Native Title Claim covers the
tenement and Salazar Gold has entered into
a Regional Standard Heritage Agreement.
The O’Connor deposit and prospects lie
entirely within E63/1469, 100% owned by
Salazar Gold Pty Ltd. The deposit is located
120km NE of Esperance on Vacant Crown
Land. The Ngadju Native Title Claim covers
the areas drilled in this program and Salazar
Gold has entered into a Regional Standard
Heritage Agreement.
● The majority of E63/5026, E63/2083,
E63,2078 and E63/2063 lie within the Ngadju
Native Title Claim for which Dundas Minerals
has entered into Heritage Protection
Agreement.
● All tenements are in good standing and no
known impediments exist outside of the
usual course of exploration licences.
● Prior work on E63/1496 and E63/1469 (apart
from Salazar Gold Pty Ltd) carried out by
Azure Minerals Limited in the Newmont area
included aerial photography, calcrete, soil
and rock chip sampling, airborne magneticradiometric-DTM survey, gravity survey, an
IP survey, and AC, RC drilling.
Criteria
JORC Code explanation
Commentary
●
Goldport Pty Ltd carried out exploration for
gold and copper in the area mostly covered
by E63/2056 in 2006 to 2008 but did not
analyse for REEs.
●
In 2012, Anglogold Ashanti drilled 221
aircore holes in a small part of the southern
portion of E63/2063 for gold exploration and
analysed for REEs of bedrock end of hole
interval only.
Drilling is targeting regolith hosted REE
enriched saprolitic clay deposits within the
Nornalup Zone of the Albany Fraser Orogen
where the saprolite-saprock target regolith
horizon interacts with REE enriched orthoamphibolite, tonalite and Esperance Granite
Supersuite granites and structural
complexities.
Geology
● Deposit type, geological setting and
style of mineralisation.
●
Drill hole
Information
● A summary of all information material
to the understanding of the exploration
results including a tabulation of the
following information for all Material
drill holes:
o easting and northing of the drill
hole collar
o elevation or RL (Reduced Level –
elevation above sea level in metres)
of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception
depth
o hole length.
● If the exclusion of this information is
justified on the basis that the
information is not Material and this
exclusion does not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
● All drill results are reported to the ASX in
accordance with the provisions of the JORC
Code
● Drill hole collar information quoted is
tabulated in Table 2 of the main body in
‘Dundas Minerals Ltd, ASX Announcement,
28 April 2023.’
● And as a zip file within Anglogold Ashanti,
Viking Project, Combined Annual Report to
the Dept of Mines and Petroleum for the
period ending 30 September 2012 (public
domain). See:
https://geodocs.dmirs.wa.gov.au/Web/docu
mentlist/10/Report_Ref/A96137
Criteria
JORC Code explanation
Data
aggregation
methods
●
● In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
●
truncations (eg cutting of high grades)
and cut-off grades are usually
Material and should be stated.
●
● Where aggregate intercepts
incorporate short lengths of high
grade results and longer lengths of low
grade results, the procedure used for
such aggregation should be stated and
some typical examples of such
aggregations should be shown in
detail.
● The assumptions used for any
reporting of metal equivalent values
should be clearly stated.
Relationship ●
between
mineralisatio
n widths and ●
intercept
lengths
●
Commentary
No metal equivalent values are used for
reporting exploration results.
Multielement results (REE) are converted to
stoichiometric oxide (REO) using element-tostoichiometric conversion ratios.
These stoichiometric conversion ratios are
stated in the ‘verification of sampling and
assaying’ table above and can be referenced
in appropriate publicly available technical
data
● Due to the sub-horizontal distribution and
These relationships are particularly
orientation of the regolith hosted
important in the reporting of
mineralised trend the vertical orientation of
Exploration Results.
drill holes is not believed to bias sampling.
If the geometry of the mineralisation
Supergene effects have yet to be completely
with respect to the drill hole angle is
understood.
known, its nature should be reported.
If it is not known and only the down
● Drilled width is approximately true width
hole lengths are reported, there should
be a clear statement to this effect (eg
‘down hole length, true width not
known’).
Diagrams
● See main body of report
● Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported These should
include, but not be limited to a plan
view of drill hole collar locations and
appropriate sectional views.
Balanced
reporting
● Where comprehensive reporting of all ● All relevant information regarding REE
exploration is presented
Exploration Results is not practicable,
representative reporting of both low
and high grades and/or widths should
be practiced to avoid misleading
Criteria
JORC Code explanation
Commentary
reporting of Exploration Results.
Other
substantive
exploration
data
● Other exploration data, if meaningful ●
and material, should be reported
including (but not limited to):
geological observations; geophysical
survey results; geochemical survey
results; bulk samples – size and
method of treatment; metallurgical test
results; bulk density, groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
Further work ● The nature and scale of planned
further work (eg tests for lateral
extensions or depth extensions or
large-scale step-out drilling).
● Diagrams clearly highlighting the
areas of possible extensions, including
the main geological interpretations
and future drilling areas, provided this
information is not commercially
sensitive.
The Inferred and Indicated REE Mineral
Resources at Newmont and O’Connor (2023)
were reported in the West Cobar Metals ASX
announcement of 9 August 2023.
●
Further AC drilling is planned to infill the
current drill patterns at Newmont and
O’Connor
●
AC drilling at an optimum density is planned
at O’Connor to extend Inferred Resources
●
AC drilling to explore the tenements newly
acquired from Dundas Minerals is planned.
● Further metallurgical testwork is being
undertaken to optimize the leaching
recoveries and beneficiation of REE’s at
Newmont and O’Connor.
Share your feedback
Discover