Quarterly Activities and Cashflow Report - March 2025
Released
Released
Announcement PDF
30 April 2025
Dundas
Minerals Limited
Directors
Non-Executive Chairman
Mark Chadwick
Managing Director
Shane Volk
Non-Executive Director
Graeme Purcell
Company Secretary
Shane Volk
Issued Capital (ASX: DUN)
Ordinary Shares: 107,218,346
Unlisted Options:
37,000,000
Convertible Notes:
$1,000,000
Highlights
o Baden-Powell drilling extends gold mineralisation at the
deposit
o First pass Aircore drilling program completed within the
Olympia mining lease
Dundas Minerals Limited (ASX: DUN) (“Dundas Minerals”, “Dundas”
or “the Company”) is actively exploring for gold at the Windanya and
Baden-Powell projects, located adjacent the Goldfields Highway
~60km north of Kalgoorlie, Western Australia.
RC Drilling: Baden-Powell Gold Deposit
Results from the 15 hole Reverse Circulation (RC) drilling program that
was completed at the Baden-Powell gold deposit in December 2024, were
received during the quarter. The program was designed to test for
extensions to the established 23,000 ounce JORC (2012) gold Mineral
Resource estimate.
Assay results from the drilling were encouraging, the best results were:
• 12 metres @ 1.3g/t gold from 84m, including 4m @2.0g/t gold from
84m (24BPRC007)
• 8 metres @ 1.3g/t gold from 92m, including 4m @2.5g/t gold from
92m (24BPRC006)
• 16 metres @ 0.8g/t gold from 164m (24BPRC006)
• 4 metres @ 2.4g/t gold from 136m (24BPRC013)
• 4 metres @ 1.3g/t gold from 44m
(24BPRC002)
• 4 metres @ 0.9g/t gold from 76m
(24BPRC005)
In terms of expanding the established zones of gold mineralisation at the BadenPowell deposit, hole 24BPRC006 (8m at 1.3g/t Au from 92m, including 4m at 2.5g/t
Au from 92m, and 16m at 0.8g/t Au from 164m) is situated on the northern
boundary of the gold resource envelope as it is currently modelled (Figure 1).
Results from the hole extend the interpreted zones of mineralisation to the
northwest, and down plunge of the resource, as illustrated in Figure 2.
Important intersections of gold mineralisation were also returned from the southern
portion current resource envelope, including 24BPRC005: 4m at 0.9g/t Au (from
76m) and hole 24BPRC002: 4m at 1.3g/t Au (from 44m).
Results from hole 24PBRC007, situated ~200m north of 24BPRC006, were also
highly encouraging, returning 16m at 1g/t Au (from 84m), including 4m at 2 g/t Au
(from 84m). The hole was drilled in an area of little prior drilling, and has reported
a new zone of mineralisation below that previously identified (Figure 2).
Suite 13, 100 Railway Road
Suite 13, 100 Railway
RoadWA 6008
Subiaco,
Subiaco, WA 6008
admin@dundasminerals.com
admin@dundasminerals.com
www.dundasminerals.com
www.dundasminerals.com
Page 2
4 metres @
2.4g/t gold
Granted Mining Lease
Drill hole collar
Drill hole direction
Greenstone
Current Mineral
Resource wireframe
12 metres @
1.3g/t gold
8 metres @
1.3g/t gold
Current Mineral
Resource wireframe
Section (Figure 2)
4 metres @
1.3g/t gold
Section (Figure 2)
Figure 1: Location of Baden-Powell drill holes relative to the current Mineral Resource estimation
wireframes (background: regional interpreted bedrock geology over satellite image)
Au g/t
> 0.2
> 1.0
> 0.5
> 2.0
Possible counter plunge of 30° to 130°
24BPRC007
(16m @ 1.0g/t)
24BPRC006
(8m @ 1.3g/t)
(16m @ 0.8g/t)
24BPRC013
Resource
(4m @ 2.4g/t)
Estimate
Figure 2: Baden-Powell section looking towards 060, showing drill hole traces, gold grade intercepts and
possible extent of interpreted gold mineralisation.
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 3
The current Mineral Resource estimate for the Baden-Powell gold deposit is 23,000 ounces (for details see Appendix
1). At Baden-Powell, drilling has predominantly been confined to 100m or less (83%), with only 12 of the 192 holes
drilled at and around the deposit extending beyond 150m. The deposit is open at depth and to the north and south.
Figure 3: Location of Baden-Powell and Capricorn gold deposits.
Aircore Drilling: Olympia
During the quarter, a first-pass Aircore drilling program comprising 50 holes (50 metre spacing) on 5 lines spaced at
200m, for a total of 3,519 metres, was completed in the northeast portion of granted Mining Lease: M 24/919
“Olympia”.
The program was designed to test for shallow gold mineralisation (less than ~75m below surface), along the
interpreted eastern contact between the Mt Ellis Gabbro and Bent Tree Basalt (Figure 4).
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 4
3m @ 0.5g/t Au
4m @ 0.48g/t Au
(25OLAC001)
(25OLAC011)
4m @ 0.82g/t Au
(25OLAC017)
1m @ 0.8g/t Au
(25OLAC038)
Granted Mining Lease
Drill hole collar (Aircore)
Figure 4: Location of Aircore drilling within the granted Olympia Mining Lease (M 24/919).
(background: regional interpreted bedrock geology over satellite image)
As summarised in Table 1, eight of the fifty Aircore holes returned assays that were anomalous for gold (above 0.2
g/t). Best results were from holes 25OLAC017 (4m at 0.82g/t gold from 100m) and 25OLAC038 (1m at 0.8g/t gold from
80m), as illustrated in Figure 4.
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 5
Hole ID
East
North
(MGA94_51)
RL
Depth
From
Dip Azmuth
(m)
(m)
To
(m)
Interval Intersection
(m)
> 0.2g/t Au
104
81
72
87
80
72
68
76
60
40
72
76
52
58
32
4 mtr
1 mtr
4 mtr
3 mtr
4 mtr
4 mtr
4 mtr
4 mtr
4 mtr
4 mtr
4 mtr
4 mtr
4 mtr
2 mtr
4 mtr
25OLAC017 329048
25OLAC038 329455
6657049
6656845
390
390
118
81
-60
-60
270
270
25OLAC001 328751
6657450
390
87
-60
270
25OLAC011 328955
6657251
390
93
-60
270
25OLAC048 329049
6656643
390
60
-60
270
25OLAC002 328794
6657443
390
81
-60
270
25OLAC029 329001
25OLAC025 328798
25OLAC003 328844
6656850
6656846
6657442
390
390
390
71
58
70
-60
-60
-60
270
270
270
100
80
68
84
76
68
64
72
56
36
68
72
48
56
28
0.82
0.80
0.46
0.50
0.28
0.48
0.23
0.20
0.32
0.23
0.29
0.21
0.29
0.28
0.23
Table 1: Details for drill holes that retuned significant gold assay results (>0.2g/t).
Lithologies intersected in the drilling program confirmed deeply weathered, weakly magnetic gabbro-dolerite and basalt
in their expected positions, separated by a variably sheared shale horizon at the contact.
The anomalous gold results are spatially associated with the shale and basalt contact position, generally within
saprolite and locally with sporadic quartz veining and remnant silica-sericite-pyrite alteration, indicating the potential
for a hydrothermal mineralising system.
The Company is in the process of assessing the results to determine the potential for further Aircore drilling
programmes along strike within the Olympia tenement and/or first pass RC drilling programmes.
Financial
The Company ended the quarter with ~$1.1 million in cash.
Refer to the attached Appendix 5B for an overview of the Company’s use of cash during the quarter.
Related Party Transactions
In accordance with the requirements of ASX Listing Rule 5.3.5, the payments that were made to, or an associate of, a
related party of the entity that have been included in the Appendix 5B for the quarter are managing director
remuneration and non-executive director fees, inclusive of superannuation contributions (item 6.1).
ASX Listing Rule 5.3.
For the purpose of ASX Listing Rule 5.3.2, the Company confirms that there were no mining production and
development activities by the Company during the quarter.
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 6
Tenement Summary
SCHEDULE OF MINERAL TENEMENTS 100% HELD BY DUNDAS AT 31 MARCH 2025
Holder
Dundas Minerals Limited
Dundas Minerals Limited
Dundas Minerals Limited
Dundas Minerals Limited
Dundas Minerals Limited
Dundas Minerals Limited
Dundas Minerals Limited
Dundas Minerals Limited
Tenement ID
Status
E 63/2044
E 63/2045
P 24/5666
P 24/5667
P 24/5668
P 24/5687
P 24/5754
P 24/5823
Granted
Granted
Granted
Granted
Granted
Granted
Application
Application
Percent
Held
100%
100%
100%
100%
100%
100%
100%
100%
Location
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Exploration Licence E 63/2124 was relinquished during the quarter.
SCHEDULE OF MINERAL TENEMENTS SUBJECT TO THE HORIZON OPTION
The Company has an option to acquire an 85% Joint Venture interest in each tenement listed below. The option expires
9 month after the grant of mining lease application M 24/1004. The option exercise fee is $1,000,000, payable as cash or
fully paid ordinary shares of Dundas Minerals, or a combination of cash and shares at the election of Dundas. An
anniversary payment of $125,000 was paid on 29 August 2024, and the minimum in-ground exploration expenditure of
$500,000 on the tenements has been met.
Holder
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Black Mountain Gold Limited
Tenement ID
Status
M 24/959
M 24/919
P 24/5046
P 24/5507
P 24/5508
P 24/5059
P 24/5464
P 24/4817
M 24/1004
Granted
Granted
Granted
Granted
Granted
Granted
Granted
Granted
Application
Percent
Held
-
Location
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
Western Australia
CAPITAL STRUCTURE
Description
Number
Fully Paid Ordinary Shares (ASX quoted: DUN)
107,218,346
Unlisted options exercise price $0.25, expiry 1-July-2026
Unlisted options exercise price $0.30, expiry 1-July-2026
Unlisted options exercise price $0.25, expiry 10-Nov-2026
Unlisted options exercise price $0.30, expiry 10-Nov-2026
Unlisted options exercise price $0.033, expiry 16-June-2029
Unlisted options exercise price $0.0374, expiry 16-June-2029
Total Unlisted Options
2,500,000
2,500,000
1,000,000
1,000,000
15,000,000
15,000,000
37,000,000
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 7
Authorised by: Shane Volk (Managing Director and Company Secretary)
About Dundas:
Dundas Minerals Limited (ASX: DUN) is a battery-minerals and gold focussed exploration company exploring in the gold-rich
Kalgoorlie region, and southern Albany-Fraser Orogen, Western Australia. In the Kalgoorlie region the Company has an option
agreement with ASX listed Horizon Minerals Limited (ASX: HRZ) to acquire an 85% interest in two gold projects, Capricorn
(25,500oz Au inferred gold resource), and Baden-Powell (23,000oz Au inferred gold resource), and in the southern Albany-Fraser
the Company holds various exploration licences and exploration rights for gold, copper and nickel.
Capital Structure: Ordinary shares on issue (DUN): 107,218,346; Unlisted Options: 15,000,000 (Exp. 16-06-29 Ex. $0.033); 15,000,000 (Exp. 16-06-29
Ex. $0.0374); 5,000,000 (Exp. 1-7-26 Ex. $0.25 & $0.30); 2,000,000 (Exp. 10-11-26 Ex. $0.25 & $0.30); $1,000,000 of Convertible Notes
(expiring 16 June 2029)
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 8
Appendix 1 – Estimated Mineral Resources: Baden-Powell and Capricorn Gold Projects
Baden-Powell Mineral Resource at a 0.5 g/t Au cut-off.
Capricorn Mineral Resource at a 0.5 g/t Au cut-off.
Material
Oxide
Transition
Fresh
Tonnes
75,000
61,000
459,500
Au g/t
1.19
1.04
1.22
Oz Au
2,900
2,000
18,000
Material
Oxide
Transition
Fresh
Tonnes
313,100
138,800
207,400
Au g/t
1.23
1.24
1.13
Oz Au
12,400
5,500
7,500
Total
595,000
1.20
23,000
Total
659,300
1.20
25,500
Tonnages are dry metric tonnes. Minor discrepancies may occur due to rounding.
The above Mineral Resource Estimates comprises Inferred Mineral Resources, which are unable to have economic
considerations applied to them, nor is there certainty that further sampling will enable them to be converted to Measured or
Indicated Mineral Resources.
Please refer to the Competent Persons Statement pursuant to these Mineral Resource Estimations for additional
information.
Appendix 2 – Olympia Aircore drill hole details
Hole ID
25OLAC001
25OLAC002
25OLAC003
25OLAC004
25OLAC005
25OLAC006
25OLAC007
25OLAC008
25OLAC009
25OLAC010
25OLAC011
25OLAC012
25OLAC013
25OLAC014
25OLAC015
25OLAC016
25OLAC017
25OLAC018
25OLAC019
25OLAC020
25OLAC021
25OLAC022
25OLAC023
25OLAC024
25OLAC025
East
North
(MGA94_51)
328751
328794
328844
328894
328945
328699
328746
328795
328851
328901
328955
329006
329049
328906
328949
328996
329048
329104
328503
328550
328604
328654
328702
328751
328798
RL
6657450 390
6657443 390
6657442 390
6657445 390
6657450 390
6657247 390
6657247 390
6657246 390
6657242 390
6657252 390
6657251 390
6657251 390
6657244 390
6657049 390
6657043 390
6657051 390
6657049 390
6657048 390
6657250 390
6657249 390
6657253 390
6657248 390
6656851 390
6656847 390
6656846 390
Depth
Dip Azmuth
(m)
87
81
70
64
71
84
52
49
56
78
93
80
70
59
59
71
118
57
54
66
67
67
61
69
58
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
270
270
270
270
270
270
270
270
270
270
Hole ID
25OLAC026
25OLAC027
25OLAC028
25OLAC029
25OLAC030
25OLAC031
25OLAC032
25OLAC033
25OLAC034
25OLAC035
25OLAC036
25OLAC037
25OLAC038
25OLAC039
25OLAC040
25OLAC041
25OLAC042
25OLAC043
25OLAC044
25OLAC045
25OLAC046
25OLAC047
25OLAC048
25OLAC049
25OLAC050
East
North
(MGA94_51)
328855
328901
328952
329001
329052
329099
329151
329199
329240
329291
329351
329408
329455
329494
329545
328700
328750
328800
328853
328901
328949
329001
329049
329104
329150
RL
6656846 390
6656847 390
6656851 390
6656850 390
6656850 390
6656850 390
6656846 390
6656849 390
6656850 390
6656851 390
6656849 390
6656857 390
6656845 390
6656852 390
6656843 390
6656649 390
6656647 390
6656646 390
6656647 390
6656650 390
6656641 390
6656641 390
6656643 390
6656649 390
6656643 390
Depth
Dip Azmuth
(m)
86
85
44
71
49
52
66
72
83
71
78
90
81
60
43
69
71
91
81
88
66
61
60
89
71
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
-60
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
270
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
Page 9
COMPETENT PERSONS STATEMENTS
The Olympia Aircore drilling program reported in this Announcement was completed by Mr Ian Horne, who is a Member of the Australian
Institute of Geoscientists. Mr Horne has sufficient experience relevant to the style of mineralisation and to the type of activity described in
this Announcement to qualify as a competent person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves”. Mr Horne is a consultant to Dundas Minerals Limited and consents to the inclusion in this
Announcement of the matters based on his information in the form and content in which it appears.
The information in this Announcement that relates to Exploration Results was compiled and or thoroughly reviewed by Mr Graeme Purcell,
who is a Director of the Company and is a Member of the Australian Institute of Geoscientists (Membership number 4722). Mr Purcell has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken
to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Minerals
Resources and Ore Reserves’. Mr Purcell consents to the inclusion in the Report of the matters based on his information in the form and
context in which it appears.
The information in this announcement that relates to assay results from drilling at the Baden-Powell gold deposit is extracted from the ASX
Announcement titled “Drilling Expands Gold Mineralisation Potential at Baden-Powell” published on 13 February 2025. A copy of the report
is available to view on the Company’s web site: www.dundasminerals.com. The Company confirms that it is not aware of any new information
or data that materially affects the information included in the original ASX Announcement. The Company confirms that the form and context
in which the Competent Person’s findings are presented in this report, have not been materially modified from the original ASX market
announcement.
The information in this announcement that relates to the Baden-Powell and Capricorn Gold Mineral Resources (Appendix 1) is extracted
from and was originally reported in the ASX Announcement titled “Gold Resources Increase to 1.24m oz” published on 28 September 2022
by Horizon Minerals Limited (ASX: HRZ). And, in its report titled “Group Minerals Resources Statement - Amended” published on 1 August
2024, HRZ confirmed (page 24) that it is not aware of any new information or data that materially affects the information included in the
original market announcement and that all material assumptions and technical parameters underpinning the estimates published in the 28
September 2022 announcement continue to apply and have not materially changed. A copy of both announcements are available to view
on the HRZ web site: www.horizonminerals.com.au. Furthermore, the Mineral Resources estimates for the Capricorn and Baden-Powell
projects were undertaken by Mr Stephen Godfrey, a Fellow of the Australasian Institute of Mining and Metallurgy and a member of the
Australian Institute of Geoscientists, who has sufficient experience of relevance to the styles of mineralisation and the types of deposits
under consideration, and to the activities undertaken, to qualify as a Competent Person as defined in the ‘JORC Code 2012’. Mr Godfrey is
a full time employee of HRZ and has consented to Dundas Minerals Limited reporting details of the Baden-Powell and Capricorn gold
Minerals Resource Estimates in the form and context as set out in Appendix 1. The relationship between the Company and HRZ: Dundas
Minerals has an option (expiring 9 month following the grant of Mining Lease application M 24/1004) to acquire an 85% Joint Venture Interest
in various mineral tenements from HRZ, including tenements within which the Capricorn and Baden-Powell projects and gold deposits sit;
for complete details refer to the Company’s ASX announcement dated 30 August 2023.
DISCLAIMERS AND FORWARD-LOOKING STATEMENTS
This announcement contains forward looking statements. Forward looking statements are often, but not always, identified by the use of
words such as "seek", “target”, "anticipate", “forecast”, "believe", "plan", "estimate", "expect" and "intend" and statements that an event or
result "may", "will", "should", "could" or "might" occur or be achieved and other similar expressions.
The forward-looking statements in this announcement are based on current expectations, estimates, forecasts and projections about Dundas
and the industry in which it operates. They do, however, relate to future matters and are subject to various inherent risks and uncertainties.
Actual events or results may differ materially from the events or results expressed or implied by any forward-looking statements. The past
performance of Dundas is no guarantee of future performance.
None of Dundas’ directors, officers, employees, agents or contractors makes any representation or warranty (either express or implied) as
to the accuracy or likelihood of fulfilment of any forward-looking statement, or any events or results expressed or implied in any forwardlooking statement, except to the extent required by law. You are cautioned not to place undue reliance on any forward-looking statement. The
forward-looking statements in this announcement reflect views held only as at the date of this announcement.
Suite 13, 100 Railway Road
Subiaco, WA 6008
admin@dundasminerals.com
www.dundasminerals.com
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
JORC Code explanation
Sampling
• Nature and quality of sampling (e.g., cut channels, random chips, or specific
techniques
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc.).
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation Material to the Public Report.
Drilling
techniques
• Drill type and details (e.g. core diameter, triple or standard tube, depth of
diamond tails, face-samplingbit or other type, whether core is oriented and if so,
by what method, etc.).
Drill sample
recovery
• Method of recording and assessing sample recoveries and results.
• Measures taken to maximise sample recovery and ensure representative nature of
the samples.
• Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse
material.
Logging
• Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
10
Commentary
• Industry standard practices were used in the drilling and recovery of one metre
bulk samples.
• 4m composite spear samples were collected from similar sized 1m sample
representatives to a combined weight of 2-3kg with the use of a PVC spear. An
additional 1m bottom of hole sample (BOH) was collected from each drill hole
completed for multi-element geochemical determination.
• All sampling attributes were recorded in a field sampling register and transferred
to the company’s spreadsheet and database. Sample depth, sample type, sample
method, sample condition and sample recovery was recorded.
• Assay of samples utilised standard laboratory techniques. All samples were
crushed, dried and pulverised to a nominal 90% passing 75μm.
• Gold and arsenic determination of composite samples was completed via aqua
regia digest of a nominal 40gm charge, with ICP-MS finish.
• BOH samples were assayed for a broad multi-element suite via mixed acid digest
with ICP-MS or ICP-AES finish.
• Further details of lab processing techniques are found in Quality of assay data
and laboratory tests below.
• Air-core rig setup with a 3-carbide cutting edge tipped blade.
• Drilling method was able to cut regolith and weathered rock and airlift face
sample to the surface and be collected for each metre drilled.
• Utilised accredited drilling contractor Gyro Australia from Kalgoorlie, who had
a purpose built 6wd truck mounted rig with 900 CFM / 300 PSI compressor
• Holes were drilled to air-core blade refusal.
• Hole diameter was 89mm / 3.5”.
• Sample recovery was recorded by visual estimation of the bulk sample, expressed
as a percentage between 1 to 100.
• Sample quantity (recovery) was mostly 100% and obtained by airlifting pauses
between metres drilled.
• Sample quality, included maintaining a clean cyclone and drilling equipment, as
well as regular communication with the drillers and taking greater care when
drilling advance rates to match poor ground conditions are encountered.
• Sample condition was recorded using a three- code system, D=Dry, M=Moist,
W=Wet.
• Samples were a mixture of fines and coarse and the spearing sample method
captured all.
• Geological logging was undertaken for every metre drilled, for all holes drilled
using the companies standardised logging codes.
Criteria
JORC Code explanation
• Whether logging is qualitative or quantitative in nature.
• The total length and percentage of the relevant intersections logged.
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, split type, and whether sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
• Quality control procedures adopted to maximise representivity of samples.
• Measures to ensure that the sampling is representative of the in-situ material
collected, including for instance results for field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the material sampled.
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness of the assaying and laboratory procedures
used and whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc., the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
• Nature of quality control procedures adopted (e.g. standards, blanks, duplicates,
external laboratory checks) and whether acceptable levels of accuracy and
precision have been established.
Verification of
sampling and
assaying
• The verification of significant intersections by either independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data verification, data
storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
11
Commentary
• Logging records are qualitative for weathering, oxidation, colour, lithology and
alteration, and quantitative for mineralisation, veining and magnetic
susceptibility.
• The field geologist implemented and supervised all sampling and drilling
practices.
• Representative rock chips were collected for every 1m interval in chip trays. A
speared bottom-of-hole sample was collected for mineral analyse to help assist
in rock identification.
• Handheld magnetic susceptibility readings were used to aid in rock identification.
• Samples were mostly dry, Water injection was used to aid sample return in the
channel clays. Ground water was also discovered returning wet samples. The
samples moisture content was recorded for each metre in the sample register, DDry M-Moist W-Wet
• Bulk 1m interval samples from the cyclone were laid out in orderly rows on the
ground.
• Sample quality control measures were implemented by the supervising geologist,
which included a paper sample register for cross referencing, A PVC spear was
used to obtain a 4m composite sample via collection from the 1m piles. These
composite samples weighed between 1kg and 1.5kg.
• For any anomalous 4m composite sample assays, the corresponding 1m sample
were collected from the bulk sample piles using a PVC spear.
• Quality control of the assaying comprised the insertion of industry (OREAS)
standards (certified reference material) for every 20th sample.
• Sample size is appropriate to the grain size of the material sampled
• Samples were submitted to the Intertek Genalysis laboratory in Kalgoorlie for
sample preparation, then assaying in Perth by total methods AR25/MS 33 for 4m
composite samples and 4A/MS48 for bottom of hole samples. Both methods are
industry standard and appropriate for the type of mineralisation expected.
• Not applicable.
• QA/QC was by Company inserting one certified standard for each 19 samples
submitted. In addition laboratory QA/QC involved the use of internal lab
standards using certified reference material, blanks, splits and replicates as part
of the in-house procedures. QC results (blanks, duplicates, standards) were in line
with commercial procedures, reproducibility and accuracy.
• The results have been reviewed by the Company’s external consultants and
technical director.
• No twinning of drillholes has been undertaken.
• Data were collected in spreadsheet. and later transferred to the Company’s
independently managed database.
• No adjustments were made.
Criteria
Location of
data points
JORC Code explanation
• Accuracy and quality of surveys used to locate drill holes (collar and down-hole
surveys), trenches, mine workings and other locations used in Mineral Resource
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
Data spacing and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore
Reserve estimation procedure(s) and classifications applied.
• Whether sample compositing has been applied.
Orientation of
data in relation to
geological
structure
Sample security
• Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
• If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
• The measures taken to ensure sample security.
Audits or reviews
• The results of any audits or reviews of sampling techniques and data.
Commentary
• Drillhole collars were surveyed with handheld GPS with horizontal accuracy of
±3m. Data are recorded in UTM coordinates, zone 51S Geocentric Datum of
Australia 1994 (GDA-94).
• Elevation was estimated to the nearest metre from Geoscience Australia DTM,
which is more accurate than handheld GPS elevation data.
• Topographic control is considered adequate at this stage. Should the data be
subsequently used in a Mineral Resource Estimation, the collars can be surveyed
by DGPS.
• Drillholes were spaced at ~50m intervals on 5 drill lines ~200 metres apart (refer
to Table 1 for actual hole locations and distanced between lines).
• No attempt is made at this stage to undertake and update the Mineral Resource
estimation, as
Share your feedback
Discover